Analysis Of Clothing Hot Drilling Technology

　　 Hot drilling technology It refers to the technology of inserting diamonds into leather, cloth and some other materials to make their products more beautiful and beautiful.

Hot drilling is divided into three steps:

1. drilling

2. row drill

3. set in drill

How to drill

1, first look at the appearance:

First, look at the hot drill. Cutting surface The more the cutting surface, the higher the degree of refraction, the better the brightness. Secondly, if the cutting surface is uniform, cutting, scratching, and air bubbles are regarded as inferior products. The technology of hot drilling is strict, the process is complex, the yield is not very high, and the diamonds with defective rate at 3%-5% should be regarded as good products, and then look at the size of diamonds. The diameter of SS6 is 1.9-2.1mm and SS10 is 2.7-2.9mm. We should also see whether the thickness is consistent.

2, look at Gum

Turn the diamond over to see whether the color of the back glue is uniform or not. The color is bright and uniform, and it is regarded as a good diamond.

3, look firmly.

The higher the solubility of the back glue, the better the firmness of the diamond. The best way to identify diamonds is to wash it well after washing it and wash it without losing it. It proves that the fastness is good. Once it is washed, it will fall off. It proves that the firmness of glue is not good, and a good product can not be dry cleaned.

Row drill

First, use the kraft paper to make various patterns, then arrange the diamond to the fixed position on the kraft paper, then stick it out with the sticky paper.

Hot drill

Hot drilling is mainly used for several kinds of machines, such as ultrasonic drilling machine, ultrasonic point drill, ultrasonic Nail Drill, hot stamping machine and so on.